The Owens Cross Roads service area
Owens Cross Roads is a straight shot east from our South Huntsville base — out 431 past Hampton Cove, through the newer subdivisions and out toward Big Cove and the Little River side. We work the whole cove: established homes on larger lots along Old Highway 431, the newer HOA neighborhoods with brick and hardboard elevations, and the properties tucked back against the mountain.
The cove traps moisture, and that drives everything
Hemmed in by Green Mountain and Monte Sano, the cove holds cool, damp air and gives a lot of homes shade for most of the day. Algae does not need dirt to grow, it needs moisture, shade and something organic to feed on — so the mountain-facing and north elevations out here go green first and go green fastest. The same conditions put black streaks on shingles years earlier than on an open lot.
Our house washing is a low-pressure soft wash: the cleaning solution and its dwell time do the work, so the growth is killed at the root rather than pushed off the surface to regrow. On roofs, that same principle is the only safe approach — roof soft washing cleans the shingle without stripping the granules that protect it. Pressure on a shingle roof buys you a clean look now and a shorter roof life later.
Brick, stone and hardscape
There is more brick and stone work in this part of the county than almost anywhere else we work: front walkways, stone steps, retaining walls, patios and pool decks. Those surfaces need judgment rather than maximum pressure. Mortar joints and older brick will erode if you hit them hard enough to strip the growth mechanically, so we clean at appropriate pressure and rely on post-treatment to take out what is living in the pores. That is also why the clean holds instead of turning green again after the first wet month.
Driveways, pool decks and flatwork
Concrete here gets a surface cleaner rather than a wand. Two jets spin inside a shrouded housing at a fixed height and fixed angle, so every square inch receives the same pressure and the slab comes out one uniform tone instead of a patchwork of wand marks. Edges, expansion joints and transitions get hand-worked afterward. Post-treatment is what makes it stay clean: a hypochlorite and surfactant blend with real dwell time kills growth at the root. Oil and rust are separate spot treatments, and Alabama red clay staining is its own job — see red clay removal. Full process details are on concrete pressure washing.
Gutters and the drone inspection
Tree cover in the cove is heavy, and gutters here fill faster than the average in-town home. Before anything else on a gutter job we fly a free two-minute drone inspection over the roofline. No ladder, no guessing: you see the inside of your own troughs, and the photos are yours. Then we blow the troughs out, flush every downspout run, haul the debris and check fascia and soffit while we are up there. Details are on gutter cleaning.
Fences and outbuildings
Lots out here are generous, and fence runs are long. Vinyl fencing greens up on the shaded side and cleans beautifully with the same low-pressure approach we use on siding — vinyl fence cleaning. Wood gets a soft wash rather than a blast, and metal-roofed outbuildings get low-pressure chemical cleaning kept off seams and fasteners.
Getting a price
Send your address and what you want cleaned. We measure the house and the flatwork, look at exposure and tree cover, and give you a flat price up front. No hourly billing and no changes once we are on site.